Skip to content
  • Current region:
  • Select a different region:
  • There are no suggestions because the search field is empty.
Close
  • Products
  • Services
  • Applications
  • Resources
  • Company
  • Support

Theoretical Information

Explore how the Sun, atmosphere, and Earth interact — and how radiation is measured in environmental science and meteorology.

Frequently asked questions (FAQs)

How do I request calibration, repair, or service for my device?
Lorem ipsum dolor sit amet leo quis dolore dui mattis dictumst feugiat. Ultricies purus laoreet aliquam faucibus vivamus porta dolore. Orci euismod orci mauris consequat incididunt aliquet pulvinar.
What is the expected turnaround time for service or calibration?
How do I track the status of my service request or repair?
Who pays for shipping, and how do I arrange shipment for service?
Are loaner units available while my equipment is being serviced?
What should I do if my equipment is out of warranty?
How do I get technical support for software or database issues?
How do I obtain calibration certificates or compliance documentation?

Solar Radiation & Meteorology Theoretical Information

Solar radiation is the primary energy source driving Earth’s climate, weather systems, and biological processes. This page provides clear, foundational explanations of solar radiation, atmospheric behavior, and the meteorological parameters measured by modern sensors.

Use the navigation to explore:


 

 

The Sun

The Sun supplies over 99.98% of the energy that reaches Earth’s surface. Its total output is approximately 3.72 × 10²⁰ MW, which corresponds to a radiative power of 63 MW per m² at its surface.

Solar Constant

At the average Earth–Sun distance (~150 million km), the intensity of radiation reaching the top of the atmosphere is:

1,367 W/m² — “The Solar Constant.”

earths orbit and seasons

This value varies slightly throughout the year because Earth’s orbit is elliptical:

  • Perihelion (closest): early January
  • Aphelion (farthest): early July
  • Radiation is ~7% stronger in January than July

This variation has only a minor influence on seasons.

 

 

 


 

The Atmosphere

Earth’s atmosphere (70–80 km thick) significantly modifies the radiation that reaches the ground.

Composition

  • 78% Nitrogen
  • 21% Oxygen
  • ~1% other gases and water vapor — including greenhouse gases like CO₂ and CH₄

atmospheric layersAtmospheric Layers

  • Troposphere: weather, clouds, lowest 11–16 km
  • Stratosphere: dry, houses the ozone layer
  • Mesosphere: above ~50 km
  • Thermosphere / Ionosphere: to ~640 km
  • Exosphere: outer boundary

Half of atmospheric mass lies within the first 5–6 km of altitude.

How the Atmosphere Modifies Solar Radiation

Radiation is reduced by:

Scattering

  • By clouds: across all wavelengths
  • Rayleigh scattering: mainly short wavelengths (blue)
  • Mie scattering: by aerosols, wavelength‑dependent

Absorption

  • Ozone (UV)
  • Water vapor (IR)
  • Trace gases (SO₂, NO₂, aerosols)

Together, absorption and scattering change the spectral balance of radiation at the surface.

The Earth & Angle of Solar Incidence

The amount of solar radiation reaching Earth’s surface depends on:

  • Earth’s curvature
  • The thickness of atmosphere along the beam path
  • Time of day and year
  • Earth’s 23.5° axial tilt

angle of solar incidenceinclination of earth

When the sun is high in the sky (solar zenith), radiation travels through less atmosphere and is most intense. Near the horizon, atmospheric path length is ~11 times greater, reducing radiation significantly.
atmospheric depth

Albedo—the reflectivity of the surface—affects how much solar energy is absorbed or reflected.
Examples:

  • Snow: high albedo
  • Forests or dark rock: low albedo

 

 


 

KippZonen_Wavelengths_of_Solar_Atmospheric_Radiation2

Solar Radiation

Solar radiation reaching Earth spans wavelengths from 300–3000 nm, the meteorologically significant range that includes:

  • UV radiation
  • Visible light
  • Near and far infrared

Peak solar output occurs near 500 nm.

Spectral Behavior

  • UV: scattered by molecules; absorbed by ozone/trace gases
  • Visible: scattered by molecules and aerosols
  • Infrared: absorbed mainly by water vapor

earth energy budgetEnergy Balance at the Surface

Of incoming extra‑terrestrial radiation:

  • ~30% is reflected to space
  • ~19% is absorbed in the atmosphere
  • ~51% is absorbed by land and water

Absorbed short‑wave radiation becomes long‑wave infrared radiation, which is re‑emitted by Earth’s surface and atmosphere — a critical part of climate processes.

 

 

 


 

Meteorological Parameters

Meteorological observations provide essential data for weather forecasting, climate research, hydrology, air‑quality monitoring, and environmental modeling.

Main parameters include:

  • Wind speed and direction
  • Air temperature
  • Air pressure
  • Humidity
  • Precipitation
  • Visibility/haze
  • Solar & terrestrial radiation

Short-Wave Radiation Components

  • Direct Solar Radiation (S)
  • Diffuse Sky Radiation (H)
  • Global Radiation (G = S + H)
  • Reflected Radiation (R)
  • Albedo (R / G)
  • Short‑wave Balance = (S + H − R)

Long-Wave Radiation Components

  • Atmospheric Radiation (A)
  • Ground Emission (E)
  • Downward Global = S + H + A
  • Upward Global = R + E
  • Long‑wave Balance = A − E

Total Radiation Balance:
Q = S + H − R + A − E

Sensor Types

Pyrheliometer

Measures direct solar radiation, narrow field (<5°). Requires a sun tracker.

Pyranometer

Measures global or diffuse radiation, 180° field. Can be configured with glare shields or shading devices.

Pyrgeometer

Measures long‑wave infrared radiation.

Net Radiometer

Combines pyranometers and pyrgeometers to measure radiation balance.

 

 


 

UV Index & UV Radiometers

Although UV radiation is only ~6% of total solar energy, it has strong biological impacts.

The UV Index (UVI) is an internationally standardized measure indicating the intensity of erythemally weighted UV radiation at Earth’s surface.

Skin Type Classification

Different skin types respond differently to UV exposure. 

Table. of skin type classifications

Kipp & Zonen UV‑S‑E‑T Radiometers

Designed for accurate measurement of erythemal UV radiation, these sensors include:

  • Quartz domes and diffusers
  • Cosine‑corrected response
  • Thermostatic control for high accuracy
  • Rugged construction for extreme environments

Output: 0–3 VDC corresponding to 0–0.6 W/m² of erythemal radiation.

UV Index Calculation

  1. Measure UV‑E radiation using a UV‑S‑E‑T sensor (ISO 17166 compliant).
  2. Convert sensor output voltage to W/m² using the instrument’s sensitivity.
  3. Apply UV Index formula (provide graphic or formula box).

Totaal schema UV index

The radiometer’s filter set matches the erythemal action spectrum, ensuring human‑skin‑relevant UV measurement.

Contact us

Interested to chat theory with our team? We would love to hear from you.

Expand your knowledge